Installing a new shower tray is a simple way to update an existing bathroom. Although this job may seem simple and small in size, it does take some professional skills to do right. Unless you are confident with your DIY experience, you should consider hiring a professional. After all, if you don’t do it correctly, you may end up flooding your bathroom.
Here are the necessary steps to fit a new shower tray.
Choose Your Shower Tray
Shower trays come in two varieties: those on risers and those that sit flush on the floor. Before you begin the project, you need to decide which type is right for your bathroom.
Riser trays sit on legs, and they’re popular because they provide quick access to the pipes below the shower. However, many modern homes prefer the look of low profile trays. Not only do these trays have a seamless appearance, but they are also the go-to-choice for accessible bathrooms.
Mark Out the Tray Position
No matter the style you choose, you’ll need to mark out the exact location where you want to fit it. Take your time to ensure a perfect. If you make any mistakes in this step, your tray may be uneven and not drain properly. You can check your measurements with a spirit level to ensure a perfect, flat fit. You should also make sure there are no clearance problems with the shower doors particularly if there is a bath in the room.
Attach the Shower Tray
Fit your shower tray on the floor to make sure it lines up with the water waste correctly. This fit needs to be accurate for your new one to work. You may need to make adjustments to the legs to ensure a proper fit.
Fit the Side Panels
Line up the side panels to ensure they have enough room. You may need to trim them if you want a flush finish. At this time, you should also double-check to make sure your shower tray is entirely level. If it’s not, make the necessary adjustments now to prevent drainage problems.
Hook Up the Waste
Once you have the panels in place, you can hook the shower tray up to the waste trap. Pour a large kettle of water down the waste to make sure it drains quickly. If you notice any leaking, you should remove the tray and try again. Once you’re confident the waste is safely connected, you can apply a silicone sealant. Complete tiling the surrounding walls, and apply another layer of sealant to create a watertight barrier.
Finish Panel Installation
Since you checked the side panels previously, the final installation should be a breeze. Snap the panels into place using the clips in your tray kit. Make sure your sealant is dry, and test your shower once again.
Many things can go wrong when installing a shower tray, and you never know what problems you may encounter when dealing with plumbing. Hiring a professional trader from a tradesman site finder like Moderniser.co.uk can help. It is the best way to get the job done fast and according to your standards. Once you finish fitting your shower tray, your bathroom will be ready for use.
